steps CREATING BLANKET STITCH APPLIQUÉ m n We used Pellon 860F Ultra Weft Fusible Interfacing. Be sure the adhesive side of interfacing is face down to the garment embroidery area. Then, press the interfacing to attach it to your garment. Note: use the steaming function on the iron to help adhere interfacing to garment. o p Use the seam ripper or straight pin to help start peeling back the film to expose the sticky surface. q r C Letters A-D represent the alignment markings on each side of the hoop. Using a pencil and ruler, trace a line connecting A-B and C-D. This will give you the center point used to line up the center of your garment. 52 anitagoodesignonline.com You are now ready to hoop a piece of sticky back tearaway stabilizer with the glossy side facing up. Using a seam ripper or straight pin, gently score an ‘X’ on the surface of the paper as shown. Continue peeling to remove the rest of the film from the sticky back tearaway stabilizer. Using the center point you created with pins on your garment in step ‘J’, line up your center pins with the center point on your stabilizer. B D A
20162AG
To see the actual publication please follow the link above