Page 62

20162AG

steps STITCHING VOTIVE DESIGNS g h Using scissors, trim the excess fabric away, as close as possible to the tack down stitches. Repeat steps D-G for any remaining appliqué fabrics i j Your design should look like this once the base fabric is removed from the marking stitches. Note: Be careful not to remove or puncture the stabilizer. k l The next machine step will be the tack down stitch for the clear vinyl fabric. Then, trim all the excess clear vinyl fabric away from the tack down stitches. 60 anitagoodesignonline.com Be sure to run any additional embroidery steps of the design. Then, run your marking stitch showing you where to trim away the base fabric. Using a seam ripper, carefully create a small hole in the base fabric inside the marking stitches. Then, use sharp scissors to remove the base fabric within marking stitches. Now, lay the clear vinyl fabric over the marking stitch, completely covering all sides. Once the clear vinyl fabric is trimmed away, place a piece of organza over the same marking stitch created in step ‘H’, completely covering all sides. Tape in place if needed.


20162AG
To see the actual publication please follow the link above