OPERATION OF SELF STORING MODELS - RE-INSERTING SASH ! • You must use BOTH hands to support weight of sash. • Move Sash only when door is CLOSED & LATCHED! • The outside TOP Sash must be re-inserted BEFORE the inside bottom sash. Step 1- TOP SASH MUST BE INSERTED FIRST. Insert one swivel sash key by rotating one of the top corners into the door track and then repeat for the other side. Step 2- Tilt sash into track at bottom and slide the sash bolts into the bottom corner channels. The sashes will interlock with each other once in place. OPERATION OF SELF STORING MODELS - SCREEN ! Duraguard Models contain built-in stainless steel screen where removing screen is not available. 8 14 OUTSIDE VIEWS Compress & Release Springs 3 1 Insert spring side FIRST Step 1- Using the extruded pull handle, push or compress the springs on the opposite side of screen stop lip. This will allow screen to release from the channel. 2 Slide sash bolts into Channel 1 Insert Top Swivel Sash Key The Top Sash is always located on the upper outside track and the Bottom Sash is always located on the lower inside track. PROPER CLOSE POSITION: Make sure the top sash is in the upper most position and bottom sash is in the lower position. By doing so, this ensures an optimal barrier against the outside elements. ! ! REMOVING EXTERIOR SCREEN RE-INSERTING EXTERIOR SCREEN Step 1- Place spring side of the screen into one side of channel first and then push the other side in. The screen will be snug in channel and will not fall out.
20330AC
To see the actual publication please follow the link above