MAGNET Recipe Remove the hoop from the machine and place it face down. I. J. 200 G. L. H. Tape your fabric in place to prevent it from moving while stitching. Turn the hoop back over and place it back in your machine. Stitch step 5 of your embroidery design which is the tack down stitch for the back fabric. K. Remove the hoop from your machine, but do not take the design out of the hoop. Carefully trim the fabric as close to the tacking stitches as possible. Repeat on the front as well. Lay your back fabric right-side up so that it completely covers the placement stitch. The back of your hoop should look like this. Note that we’ve used a dark thread here so that it is easy to see. It will be covered by the satin finishing stitches, but you will still want to use a thread that blends with your back fabric. This is the finial finishing step and is very important. You will need to wind a bobbin to match your top thread. Note: Please see your machine manual for instructions on winding a bobbin
20385AG
To see the actual publication please follow the link above