Anita’s Bowl Wonderland Covers | Tutorial
| Overview Anita’s M N
Next, you will pin the band fabric to your embroidered circle
base. Start by aligning the raw edge of the band fabric to the
right side of the base circle edge. Start about 3 1/2” in from the
end of the band.
Make a mark on the band fabric using the mark on the circle
as your guide. Add 1/2” beyond the mark and trim the excess
fabric.
Next, connect both sides of the band placing right sides
together using pins.
Using a pencil or fabric pen, make two marks 5” apart on the
circle. Make a third mark in the center of the two marks, 2 1/2”
inches between each mark. These marks indicate where you
will eventually trim your edges.
O
Begin sewing the edge of the band fabric, using a 5/8” seam
allowance. Remember to remove the pins as you go. Start at
the first pin (which is in the same place as your first mark) and
end at last. By using the marks you will ensure there is a 5”
space remaining that is not sewn.
Repeat same process on other side of band fabric.
Wonderland | Premium Collection | 236
P
Q R