Micro Cutter
Item #: 400-099
The tapered tips are designed to cut
soft wire pins and ligature wires up to
.012" (.30 mm). The slim, short curved
tips allow for access into difficult areas
with 15o offset tips. Cutting edge
length 0.39" (9.87 mm).
Micro Mini Pin
& Ligature Cutter
Item #: 400-104
Designed to cut soft wire pins and
ligature wires up to .012" (.30 mm).
The ultra slim profile, pointed and
tapered tips allow access in the most
difficult areas. Cutting edge length
0.50" (12.67 mm).
Mini Pin & Ligature Cutter
Item #: 400-105
Designed to cut soft wire pins and
ligature wires up to .012" (.30 mm).
The slim profile is a plus in difficult
to access areas. Cutting edge length
0.50" (12.67 mm).
Micro Mini Pin & Ligature
Cutter, 15o Angled
Item #: 400-108
Multi-Use Cutter
Item #: 400-106
Designed to cut soft wire pins and
ligature wires up to .015" (.38 mm).
Cutting edge length 0.50" (12.67 mm).
Hard Wire Cutter
Item #: 400-107
Designed to cut hard wires up to .021"
x .025" (.53 mm x .64 mm). Cutting
edge length 0.46" (11.70 mm).
Long Tapered
Bird Beak Plier
Item #: 400-109
Bird Beak Plier
Item #: 400-110
Designed for smooth wire bending for
a range of loops sizes for round wires
up to .030" (.76 mm).
Bird Beak Plier with Cutter
Item #: 400-111
Designed for smooth bending surfaces
for a range of loop sizes while providing
a sharp blade for cutting. Cuts up to
.021" x .025" (.53 mm x .64 mm).
Designed to bend a variety of smooth
loops up to .021" x .025" (.53 mm x
.64 mm).
Designed to cut soft wire pins and
ligature wires up to .012" (.30 mm). The
15o offset tip with ultra slim profile is a
plus in the most difficult to access areas.
Cutting edge length 0.54" (13.72 mm).
Side
view
Side
view
Side
view
Side
view
Side
view
Side
view
Light Wire Bird Beak
with Groove Plier
Item #: 400-130
Designed with a longer cone than a
standard bird beak and is useful for
forming precise loops in light wires up
to .020" (.51 mm). The groove allows
for locating and duplicating loops.
179
ORTHODONTIC INSTRUMENTS
Instruments