CREATING A HANDHELD DEVICE
STEP BY STEP INSTRUCTIONS
A STUFFEDCELL1-FRONT
B
To start hoop a piece of No Show Mesh stabilizer. We will be
stitching out the front portion of the design first. For example,
we are stitching STUFFEDCELL1-FRONT.
Run the first step which is a placement stitch for a piece of
base fabric.
C D
Place a piece of base fabric right side facing up covering the
placement stitches entirely.
Run the next step which is the tacking stitch. This stitch will
attach the base fabric to the stabilizer.
Since we need the excess fabric as a seam allowance, DO
NOT trim this.
E F
Repeat steps B and C for the next appliqué. You will need to
trim the excess fabric sticking out beyond the tacking stitch
as shown.
In this particular design, you can include a piece of clear vinyl.
Use this as an appliqué and place it directly on top of your last
appliqué fabric tacked down.
Dolls 1,2,3 | Premium Collection | 106