4 1/2” x 13”
4” x 13” 4” x 13”
4 5
Happy Handbags | All Access | 238
3/4” x 28”
12” x 12”
3” x 18 1/4” 3” x 18 1/4”
Take the fabric lining and place it over the outer fabric. Be sure to
line up the corners closely.
Once you have successfully bonded the fabrics together, you can
now measure the pieces and cut them accordingly.
Return to the first page of this tutorial to see the exact
measurements required for each piece.
To sew the vinyl panel, align the front pieces of fabric, and line
them up 3” and parallel from each other as shown. lay the vinyl
on the fabric lining side and tape in place. TIP: If you’re using
directional fabric, make sure they’re going the same direction!
To glue the outer and lining fabric together, use an iron to melt the
glue again and bond the two fabrics.
TIP: Remember to follow the directions for the Ultrabond that you
purchase.
After cutting your fabric pieces to size, lay them out to make sure
you’re not leaving anything out. (We’ve outlined the strip of vinyl in
dark grey).
Next, carefully flip the tote and tape the vinyl on this side as well.
6
8
7
9