ADDING BINDING
STEP B
Starting at the bottom center of the potholder,
place the binding strip along the raw edge
of the front, right sides together. Make
sure that the raw edge of the binding is
aligned with the raw edge of the block.
Then, fold back the starting edge of
binding strip at a 45° shown in picture.
You will begin to stitch along the first
edge using a 1/2" seam allowance.
STEP C
Stop stitching 1/2" from the first corner
you come to. Then, continue stitching
on a 45° to the edge of the binding
strip as shown with dotted arrow.
STEP D
Remove the potholder and binding
from the machine. Fold the binding strip
back on itself at a 45°, perpendicular
to the seam you just stitched.
Thanksgiving Pot Holders | Anita's Express | 137