STEP-BY-STEP INSTRUCTIONS
STEP J
Place a sheet of mylar over the placement stitches,
being sure to cover them entirely. Use tape if needed
to secure the mylar in place until tacked down.
STEP K
Run the tacking stitch for the first mylar appliqué,
then proceed to run the decorative overlay step for
the mylar. This overlay stitch is intended to prevent
the mylar from tearing or coming out of the design
over time.
STEP L
The machine will continue on to the tacking stitch.
This will secure the fabric to the stabilizer. Trim the
excess fabric away from the design.
MYLAR CHRISTMAS CARDS | ANITA'S EXPRESS | 288
While the appliqué for these
designs are digitized for mylar, you
can still use other fabrics too. Just
skip the overlay stitches to make
these cards with standard appliqué!