25 26
Fold the handles over to create a 1” pocket. Then, place
webbing for handle strap inside of pocket and pin to secure.
To create the strap handles, measure across the top,
approximately 1⁄4” inside your seam. Our total length was 12”.
We are using 1” nylon webbing for our straps.
27 28
Repeat steps 25 and 26 for both ends of the strap. Your
project should look something like this.
Use your sewing machine to sew the pocket over, and to
ensure the strap does not move. Note: When sewing the
pockets down, the fabric on each ends may be thick, if so,
we recommend sewing only the inside seam.
29 30
Repeat steps 25 - 28 to create the second handle for the
Casserole Holder.
Once the handles are attached, your project should look
something like this.
DIY WITH ANITA | ALL ACCESS | 58