G BACK OF HOOP H
I
Fold the MRB-FRONT back over it’s folding stitch and tape it
in place too.
J BACK OF HOOP
L
BACK OF HOOP
Run the decorative bean stitch, which is the last machine
step in the design. Then remove the tape.
If you flip the hoop over to have the back side facing up, you
will notice that the front’s lining fabric was tacked down at
the same time at the MRB-FRONT file. You can now remove
the tape from back of the design.
Fold the front’s lining over it’s folding stitch. Use tape to keep
the front’s lining secured to the back of the hoop until the
design is finished.
Repeat the same technique shown in picture steps D - I to
attach the back fabric and back lining to the other side of the
zipper. Once finished, the back of your design should look
something like this.
K
Once your back fabric and back lining are attached, your
design should look something like this. Pull the fabric taught
against their respective folding stitches (along the zipper)
and tape securely before running the last step of the design.
MONOGRAMMED RUFFLE BAGS | PROJECT | 19