Y Z
Remove the design from the hoop. Use a pair of scissors to
trim away the excess stabilizer and fabric from the edges of
the tacking stitch.
NOTE: Be sure to leave at least 1⁄4” seam allowance on
either side of the bag’s tacking stitch.
AA BB
Once trimmed, your design should look something like this.
Use a seam ripper or small scissor to remove the stabilizer
from behind the zipper.
Reach into the inside of the bag through the zipper’s
opening and turn the design to have it’s right side facing out.
Run the last step of the design, which is the tacking stitch to
secure the back fabric and lining fabric to the design.
ZIPPERED BAGS WITH MATCHING KEYCHAINS | PROJECT | 214