HOW TO MAKE THE PERFECT POUCH
STEP-BY-STEP INSTRUCTIONS
A B
Use the placement stitch for your zipper as a guide. Make
sure your zipper teeth line up with the center line of the
placement stitch. Secure your zipper in place by using a few
pieces of tape. Run your next machine step, which will be the
tacking stitch for your zipper (shown in white).
C D
Once your zipper is tacked in place, turn your hoop to the
back side so the bobbin stitches are facing you. Lay the
lining for your bag face down, aligning the bottom edge of
the fabric to the bottom edge of your zipper. Tape your fabric
in place.
Flip your hoop back to the front side of the bag and repeat
step C for the bottom panel. Be sure to secure your fabric in
place with a few pieces of tape.
To begin, start by hooping a piece of No-Show mesh
stabilizer. Run your first machine step, which will be the
placement stitch for your bag and zipper.
NOTE: For this example we are using design file SS1.
BACK OF HOOP
SNACKY SNACK | PROJECT | 133