G H
Once both lace ends of the table runner have been created,
rinse the ends in hot water to dissolve the remaining
stabilizer. Be sure to rinse until all the stabilizer has dissolved.
Press the ends with a towel and lay flat to dry.
I J
After the lace has dried, double fold one of the long, raw
edges of the runner towards the back side. Pin in place, then
hem from the top side of the runner using a straight stitch
and matching thread. Repeat on the other end of the runner.
You now have a beautiful Lace Table Runner that will last for
years to come!
Run the next machine step, which is the lace portion of the
design. Then, remove your design from the hoop and repeat
this same process for the other end of your table runner,
being sure to stitch on the right side of the fabric. Use the
pictured instructions in steps A - G as your guide.
LACE TABLE RUNNERS | PROJECT | 26