4 INSTALLING DOOR INTO OPENING ATTACHING LATCH SIDE Z-BAR Step 8- Cut and install latch side z-bar maintaining approximately 1⁄16" clearance between door and z-bar. Step 9- Fasten with #6 x 1" screws 9 Install #6 x 1 screw 5 REMOVING PRE-HANG CLIPS Caution: Do not use a tool to remove pre-hang clips, doing so may cause damage to door slab. YOU MUST ROTATE PRE-HANG CLIP COUNTER-CLOCKWISE TO REMOVE. ! Side View Side View 6 Remove Pre-hang Screw Step 1- After door has been installed, remove (1) #8 x 1⁄4" Phillips Panhead Screw that is installed into each of pre-hang clips. Step 2- Allow door to swing open. Step 3- To remove pre-hang clips, turn pre-hang clip(see illustration) a 1/4 turn counter- clockwise by hand. There will be 2 pre-hang clips at top header and 3 pre- hang clips on vertical latch side of storm door frame. Screw Cap Cover Latch strike 1 The slim line z-bar application will use a slimmer pre-hang clip and will not have “Remove” on the clip. ! Turn counterclockwise 2 Pre-Hang Clip for Leaf or Piano Hinge Pre-Hang Clip for Slim-Line Zbar Application Application
20330AC
To see the actual publication please follow the link above