Kluson® Modern Bolt Bushing to
Vintage Push-In Cosmetic Adapter
Kit for Vintage Stamped Steel Series
Tuning Machines
Kluson’s new hex bolt adapter bushing kit allows you
to take a modern production or vintage instrument
that was bored out for larger die cast tuning peg holes
and convert the peghole to a vintage size without
losing the hex head diecast appearance from the
front. The specially designed washer fits neatly under
the hex head push-in bushing to maintain a clean
conversion appearance while making a conversion
to Kluson Vintage Stamped Steel Series tuning
machines. This conversion bushing is for 1/4 in. or 6
mm string posts. Sold in sets of (6) bushings with (6)
matching washers.
Description SKU
1/4 in. Black KHBKIB
1/4 in. Chrome KHBKIC
1/4 in. Gold KHBKIG
1/4 in. Nickel KHBKIN
6 mm Black KHBKMB
6 mm Chrome KHBKMC
6 mm Gold KHBKMG
6 mm Nickel KHBKMN
Kluson® Replacement Bushing Set for
Vintage Stamped Steel Series Tuning
Machines & Contemporary Gibson®
Guitars
These Kluson® replacement push-in bushings are
designed to appear like current Gibson® production
with the more rounded flange. Same mounting specs
as the bushings that accompany the current Kluson
production tuning machines so they will easily replace
similar bushings with the same spec requirements.
Description SKU
Black MBG65B
Gold MBG65G
Nickel MBG65N
Kluson® Replacement Screw Cap For
Locking Vintage Stamped Steel Series
Tuning Machines
A replacement for Kluson’s Locking Vintage
Stamped Steel Series tuning machine screw caps.
Great to keep on hand just in case you happen to
lose one on stage!
Description SKU
Black KLCAP-B
Gold KLCAP-G
Nickel KLCAP-N
Kluson® Replacement Buttons for
Vintage Stamped Steel Series Tuning
Machines
These buttons are a direct replacement for Kluson®
vintage stamped steel tuning machines. Will fit
modern or vintage applications. Button shaft hole is
molded as a straight slot and can be drilled out to fit
varied shaft sizes.
Description SKU
Butterbean Black BUTTON 05BK
Butterbean Vintage White BUTTON 05P
Keystone BUTTON SLN
Keystone Double Ring BUTTON SLN DR
Kluson® Replacement
Tuning Machine Bushings
for Vintage Fender® Guitars
Replacement bushings for vintage Fender®
guitars - 8.85mm OD, (1/4 in. ID). These are direct
replacements for original Fender guitars.
Description SKU
Black FB65B
Gold FB65G
Nickel FB65N
Kluson® Replacement Stamped Eyelet
Bushing Set for Vintage Stamped
Steel Series Tuning Machines &
Vintage Gibson® Guitars
These simple stamped brass press-fit bushings
were used in many instruments from the early
1920s through to the 1960’s by Gibson® and other
instrument manufacturers. They work great as
replacements for originals or if you’d just like to add a
vintage touch to your peg head. They fit guitars, ukes
and mandolins where 1/4 inch diameter string post
I.D. is required.
Description SKU
Gold MBS65G
Nickel MBS65N
Nickel Relic MBS65NR
Kluson® Mounting Screws for
Vintage Stamped Steel Series Tuning
Machines
Used to secure Vintage Stamped Steel Series tuning
machines to the back of the headstock.
Description SKU
Gold (12) KTMSG/P
Gold (50) KTMSG
Nickel (100) KTMSC
Nickel (12) KTMSC/P
MBS65NR
Nickel Relic
Finish
MBG65N
Nickel Finish
FB65G
Gold Finish
KHBKIC
Chrome Finish
KLCAP-G
Gold Finish
KLCAP-N
Nickel Finish
BUTTON 05BK
Butterbean Black
BUTTON SLN DR
Keystone
Double Ring
KTMSG
Gold Finish
21