Accessories
13) SECOND CYLINDER (IN/OUT): Extend the second cylinder by pressing the
OUT button. Keep an eye on the oil level in the reservoir. With the cylinder
fully extended, the oil level should not go below ½ full.
14) After the second cylinder is fully extended, press the IN button to fully retract
141
the cylinder.
15) Extend and retract the second cylinder a few times until all the air is removed
from the hydraulic oil.
16) After both cylinders are primed and fully retracted, recheck the level of the oil
in the reservoir.
BATTERY CABLES
Low voltage will cause the motor to run at higher amps and may cause damage to
other electrical components. To minimize voltage drop, increase the gauge size of
the battery cables as the length of the positive and ground cables increase.
Cable Length Wire Gauge Nominal OD (in).
1 to 2 feet 4 gauge 0.43
3 to 4 feet 2 gauge 0.49
5 to 7 feet 1 gauge 0.56
8 to 9 feet 1/0 gauge 0.61
10 to 12 feet 2/0 gauge 0.66
13 to 15 feet 3/0 gauge 0.72
16 to 19 feet 4/0 gauge 0.78
diagram A-4 diagram A-5