83
LOADING & UNLOADING A DUMP TRAILER
DROP-N-GO ROLL OFF DUMP LOADING AND UNLOADING
*WARNING – Failure to
follow instructions may
cause serious injury or
death*
5.3.1.4 Unloading Box from Trailer
1. Put towing vehicle in Neutral.
2. Lift the dump box with the KTI hyd.
unit to about a 40 degree angle.
3. Start letting out the winch for the box
to slide off slowly, if box does not begin
to slide, raise the bed with the KTI hyd.
unit a little more. Ensure the trailer rails
don’t dig into the ground.
*WARNING – DO NOT STAND IN FRONT
OF TRAILER AS THE TOW VEHICLE WILL
START TO MOVE WITH THE TRAILER*
4. Once the box is completely off, pull
forward with your towing vehicle to give
clearance to unhook the winch cable.
5. Let down the trailer frame and roll up
the winch cable.
5.3.1.5 Loading Box on Trailer
1. Back the trailer up to the front of the
box.
2. Lift the trailer frame with the KTI hyd.
unit all the way up. Make sure the frame
rails don’t dig into the ground and the
box is in line with the trailer.