INSTALLATION & OPERATIONAL MANUAL
FOR PRE-HUNG STORM DOOR
Tools & Materials You Will Need:
• Measuring Tape • Hammer
• Level • Hacksaw
• Pliers • Drill Bits - 3⁄32", 5⁄16"
• Power Drill • Square
• Stiff Utility Knife • Pencil
• Soft Mallet • Phillips and Flathead Screwdrivers
Installation Screwpack Contents:
REMEMBER: ALWAYS USE THE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT.
This Installation and Operational Instruction Manual is
for ProVia Storm Door Models operating with self-storing
sashes or with stationary sash and screen inserts.
Door slab with attached z-bars for header, hinge and latch side.
Bottom expander will be attached to bottom of door slab. Screw
cap covers, vinyl sweeps and hardware kit will ship inside door
carton separately from door slab.
(1) pk #7 x 1" Phillips
Panhead Screws
(1) pk #6 x 1" Phillips
Panhead Screws
(1) pk #8 x 1 1⁄2" Phillips
Truss Head Screws
(2) #6 x 1⁄2"
Phillips Panhead
Screws - color
matched
For hinge side of leaf zbar
mounted onto jamb
For exterior mounting
of z-bar frame for both
leaf and piano hinge
z-bars
For hinge side of piano zbar
mounted onto jamb
For bottom
expander
Sash Clips &
Thumbscrews - see
inside hardware
box
Your Package Should Contain The Following
Components:
Homes built before 1978 may contain lead paint. All replacement installations must
comply with the U.S. EPA’s Lead-Based Paint Renovation, Repair, and Painting Program
(RRP Rule). Read more about the RRP Rule and lead-safe work practices, on the U.S.
EPA’s website at: www.epa.gov/lead !
1
/lead