OPERATION OF SELF STORING MODELS - RE-INSERTING SASH
! • You must use BOTH hands to support weight of sash.
• Move Sash only when door is CLOSED & LATCHED!
• The outside TOP Sash must be re-inserted BEFORE the inside bottom sash.
Step 1- TOP SASH MUST BE INSERTED FIRST.
Insert one swivel sash key by rotating one of
the top corners into the door track and then
repeat for the other side.
Step 2- Tilt sash into track at bottom and slide the
sash bolts into the bottom corner channels.
The sashes will interlock with each other once
in place.
OPERATION OF SELF STORING MODELS - SCREEN
! Duraguard Models contain built-in stainless steel screen where removing screen is not available.
8 14
OUTSIDE
VIEWS
Compress &
Release
Springs
3
1
Insert
spring
side
FIRST
Step 1- Using the extruded pull handle, push
or compress the springs on the opposite
side of screen stop lip. This will allow
screen to release from the channel.
2 Slide sash
bolts into
Channel
1 Insert Top
Swivel
Sash Key
The Top Sash is always located on the upper outside track and the
Bottom Sash is always located on the lower inside track.
PROPER CLOSE POSITION: Make sure the top sash is in the upper
most position and bottom sash is in the lower position. By doing
so, this ensures an optimal barrier against the outside elements.
!
!
REMOVING EXTERIOR SCREEN
RE-INSERTING EXTERIOR SCREEN
Step 1- Place spring side of the screen into one
side of channel first and then push the
other side in. The screen will be snug in
channel and will not fall out.