IMPORTANT ASSEMBLY ALERT
SUPPORTED PLATFORM
PREFERRED STAIR ASSEMBLY PROCEDURE
STEP 1
A
When a platform is being supported by a tower support at the stair
location, the tower should first be located on the anchor bolts and
secured in the final assembly location.
Install the Tower/Platform brackets with the bolts to the tower
upper u-bracket hand tight. The platform can then be set on top of
the tower and should be supported at both ends. If a tower is not
present at the opposite end of the platform (opposite the stairs),
then some other means of support MUST be applied.
B
C
D
A) Position the platform so that the stair mounting surface of the
platform is flush with the upper tower u-bracket “A”.
B) Torque the bolts “B” between the platform and tower first.
C) Next torque the bolts “C” connecting the upper tower u-bracket
to the tower/platform brackets.
D) Finally torque the bolts “D” connecting the tower/platform
brackets to the platform.
Tower/platform brackets are used on units with 3 or more steps.
page 2