STEP 2
A) When fitting the platform to the stairs, care should be taken to
make ABSOLUTELY sure the stair bracket, stair casting, and
platform mounting surface are flush and in alignment to one
another (as seen in “A”.)
B) First, hand tighten the bolts and nuts “B” connecting the stair/
platform bracket to the stair casting.
C) Next, with the pre-installed stair casting bolts in the platform
mounting slots, install platform backing plate and nuts “C”.
These should be hand tightened only.
D) Next, hand tighten the bolts and nuts “D” connecting the stair/
platform bracket to the platform. Tower/platform brackets are
used on units with 3 or more steps.
C
D
B
A
SUPPORTED PLATFORM
PREFERRED STAIR ASSEMBLY PROCEDURE
E) Next torque the bolts and nuts “B” ensuring that the bracket
is flat and flush to the upper stair casting. Failure to do so will
damage the casting.
F) Next torque the bolts and nuts “C” (again ensuring that the
platform is flat and flush to the upper stair casting). Failure to
do so will damage the casting.
G) Finally, torque bolts and nuts “D”. Tower/platform brackets are
used on units with 3 or more steps.
page 5