PLATFORM CONNECTIONS
HANDRAIL TO PLATFORM
STEP 1
STEP 1
Slide rail insert into handrails. Orient steel side
towards platform. May require tape to hold in
place while assembling.
STEP 2
Position handrails onto platform as shown.
STEP 3
Insert hardware and tighten hardware.
WARNING! Backing plate must be used at this
connection. Failure to use backing plates may
cause equipment to fail and may result in death or
serious personal injury.
WARNING! Do not use impact wrench. May cause
damage to unit which could result in serious personal
injury or death. See torque data.
NOTICE: Metal piece
should be oriented so that
nuts are facing plastic.
page 46