PLATFORM CONNECTIONS
REMOVABLE HANDRAIL TO PLATFORM
STEP 1
Loosely attach handrail sockets using hardware
and backing plates.
STEP 2
Slide handrails into sockets for fit and alignment,
then tighten hardware.
NOTICE: Sockets should be plumb and square to
allow handrails to slide in and out.
WARNING! Backing plate must be used at this
connection. Failure to use backing plates may cause
equipment to fail and may result in death or serious
personal injury.
WARNING! Do not use impact wrench. May cause
damage to unit which could result in serious personal
injury or death. See torque data.
STEP 1
TO PLATFORM
page 49