5 6
Hoop a layer of Tear Away stabilizer to start stitching
your coaster.
Center a piece of cork fabric in the center of the hoop.
NOTE: We cut our cork fabric to be 6” x 6” so we would
have plenty of excess fabric around the design.
7 8
Tape or pin the cork in place. NOTE: If you would like to
double check your placement of the cork before you begin
stitching, use the trace function in your machine to show
you the field in which the embroidery will stitch.
Follow the numbered machine steps of your Fiesta Word
Cloud design to stitch out the decorative embroidery. Follow
the last 3 steps on your machine to be able to add a back
fabric and a finishing stitch.
BACK OF HOOP BACK OF HOOP
9 10
Run the placement stitch on your machine, then remove your
hoop from the machine and flip to the back of the hoop.
Lay your second piece of cork fabric over the placement
stitch, then tape in place to secure.
DIY WITH ANITA | ALL ACCESS | 219