17 18
Before turning the project, use scissors to make additional
notches around the edge in the seam allowance.
19 20
Make sure the seams line up perfectly, then stitch along the top,
leaving 1/4” seam allowance.
21 22
Now for the binding edge. We’ve including this part so that there
is a clean seam along the top. Align the long edge of the binding
with the top edge of the pod. The bowed edge should be facing
you, and the pod’s peak will be facing away from you.
First, turn the lining fabric, and line up the edges.
Take the strap from earlier, then pin the edge along the edge of
the highest peak of the pod, as shown. Stitch it in place, with 1/4”
seam allowance, then turn the pod right side out.
When the binding ends reach the peak, where the loop was
sown, fold one edge back by about 1”, then lay the other end on
top. Pin to hold in place.
Storage Pods | All Access | 189