ADDING EMBROIDERY
STEP-BY-STEP INSTRUCTIONS
Take your prepped T-Shirt and measure to find the center of the
design portion. Mark it with a pin vertically and horizontally.
Using a pin, attach the shirt to the center point of the hoop.
Hoop a piece of No-Show Mesh stabilizer. Use the markings on
your hoop to find the center, and mark it on the stabilizer.
Use additional pins around the perimeter of the shirt to secure it
in place.
Make sure to remove the pins indicating the center prior to
embroidering. Complete the embroidery design of your choice,
following the machine steps specific to your design.
Remove the block from the hoop, and trim away any excess
stabilizer. Leave the excess T-Shirt fabric.
Mix and Mashup | All Access | 123
1
3
5
2
4
6