K L
Set the lining aside. To assemble the shape, refer to step G. Bring
corner 1 to meet corner 2, aligning the seams and pinning in
place.
M N
When stitching, make sure to stop at the stitch lines as shown
here.
O P
Once attached, the corners should look like this on the inside. As
you can see the seam allowance will remain loose to allow for a
dimensional corner.
Sew the pinned blocks together, in between the placement and
the tack down leaving a 1/2” seam allowance. Stitch along the
seam line being careful not to cross any parallel stitch lines at the
beginning or the end.
Once the first seam is complete, repeat steps K - M to assemble
the remaining seams to create the cover’s shape.
When all seams are finished, use a hot iron to press the seams
open. This will allow the blocks to lay flat. Set aside.
Sewing Machine Cover | | 136