ST E P - BY- ST E P
I N S T R U C T I O N S
For the next hooping, load DOODLEUSB11. Hoop a piece of
No-Show mesh and run the placement stitch.
NOTE: DOODLEUSB11 is a universal design that will work with
designs 1-10 in this collection.
Continue on with the tacking stitch, and the first marking stitches
for the USB pocket.
Place the base fabric face up on top of the placement stitch.
Make sure there is at least a ½” seam allowance on all sides.
Fold a piece of 5” x 6 3⁄4” fabric in half, hamburger-style. Align the
folded edge with the marking stitches. The raw edge of the fabric
should be long enough to reach the seam allowance on 3 sides.
A
NEW HOOPING
C
B
D
Doodle Design Case | 15th Anniversary | 111