85
Continue with any remaining folded fabric pieces by
repeating Steps M through R.
Before beginning the last secondary fabric
piece, be sure to “fold” your cornerstone fabric
out of the way (as shown by the arrow above).
With the last piece folded fabric attached, prepare to finish
tacking the cornerstone piece by running the next step,
which is a placement stitch (shown in white).
Adjust the edge until it is straight and at a satisfactory width,
then give it a good finger crease. If needed, secure with tape
at the bottom to keep the edge from shifting.
Pull the cornerstone piece back over its folding stitch and
over the placement stitch. Then fold the loose end under to
create an edge that mimics the width of the other seams.
W X
RADIAL BLOCK - STEP BY STEP
S T
U V
Run the next step, which is a tacking stitch for the folded Next will be a placement stitch for your merged design.
edge we just created as well as the remaining sides of your
first fabric piece.
NOTIONS
TIP
Remember to match your tack down thread to
your fabric color to create a clean and uniform
appearance on the folded seams.