Repeat steps BB through DD for the other 3D element
piece.
Back of Design
Now, turn the hoop over to the back side. Lay a matching
piece of fabric, right side up, covering the bobbin stitches
completely.
Use tape to secure the fabric to the back of the hoop.
TIP: If the fabric is too loose on the hoop with just the
tape, you can also use spray adhesive to secure the
appliqué.
Run the next step in the design, which will be a tacking
stitch for the back fabric.
Once tacked down, turn the hoop to the back and trim
away the excess fabric.
The back of your design should look something like this
once trimmed.
TIP: Again, don't forget to cut the fabric out of your
ribbon hole!
3 D G I F T TAGS | 1 3 7 | BABY LO C K CU R R I CULUM
S
U
W
T
V
X
Back of Design
Back of Design
Back of Design
Back of Design